The Bookends Guide to the SBL format

Users asking other users for bibliography formats.
Jon
Site Admin
Posts: 8235
Joined: Tue Jul 13, 2004 6:27 pm
Location: Bethesda, MD
Contact:

Re: The Bookends Guide to the SBL format

Post by Jon » Thu Sep 12, 2019 9:36 am

Those settings are in preferences. If you use cloud sync those settings will sync between computers. Note that you can't authenticate a new Mac at the moment because of problems with Apple CloudKit. But when that's resolved you'll be able to.

viewtopic.php?f=2&t=5021

Jon
Sonny Software

Adrian Petre
Posts: 14
Joined: Wed Aug 17, 2016 4:15 am

Re: The Bookends Guide to the SBL format

Post by Adrian Petre » Thu Sep 12, 2019 9:44 am

Thank you. So, I’ll have to wait for a fix. Now, a more punctual question: In a reference, in the Edition field for a book, I have the word “rev.”. Now, in the footnote, “rev.” is fine. But in the bibliography list, I need to have “Rev.” (capital “R”). Can this be done?

Jon
Site Admin
Posts: 8235
Joined: Tue Jul 13, 2004 6:27 pm
Location: Bethesda, MD
Contact:

Re: The Bookends Guide to the SBL format

Post by Jon » Thu Sep 12, 2019 9:50 am

Citations (footnotes) and bibliographies are configured separately, so set the case the way you want it for each. Please read the section in the User Guide on how to create and edit formats, it has all the information you need.

Jon
Sonny Software

Adrian Petre
Posts: 14
Joined: Wed Aug 17, 2016 4:15 am

Re: The Bookends Guide to the SBL format

Post by Adrian Petre » Thu Sep 12, 2019 9:03 pm

Ok. I re-read the mentioned sections. Nevertheless, I cannot find what I want. The issue is this: I have a reference type called BOOK. I format the citation option like this:
a, t ~, ed. ~e | ~, trans. ~u3* ~, ~u2~ ed.~ ~, ~u13~ vols.~|~ ~ |~, ~j v` (`{u11;$ repr., $} |~; ~, l: u, d`)`
This results in
Gerhard von Rad, Genesis: A Commentary, trans. John H. Marks, rev. ed., The Old Testament Library (Philadelphia: Westminster, 1972)
This is fine. Now, for the bibliography, I have the following:
a. t. $Edited by $e. $ Translated by $u3*. u2$ ed. $ u13$ vols. $ ~. ~ j {v.^$. $} u11~. Repr.,~ l: u, d`.`
The result is fine, except for rev. which should start with a capital letter:
Rad, Gerhard von. Genesis: A Commentary. Translated by John H. Marks. rev. ed. The Old Testament Library. Philadelphia: Westminster, 1972.
The rev. word in the bibliography needs to be Rev. Now, in the field Edition from the Book reference type, the text entered is rev. The question is this: How can I change the capitalize the R of rev. in the bibliography and keep it in lower case in the citation, and also see just one entry for the Edition field in the Book reference? Is there any way to put a condition in the code, like If Field text = 'rev.' then 'Rev.'?

Thank you for your help. I am working on an SBL2 format which is almost ready. But I keep encountering these minor issues.

Jon
Site Admin
Posts: 8235
Joined: Tue Jul 13, 2004 6:27 pm
Location: Bethesda, MD
Contact:

Re: The Bookends Guide to the SBL format

Post by Jon » Fri Sep 13, 2019 8:34 am

If the Rev is in the reference itself of course Bookends won't output it any differently. The Rev/ref should be in the format. E.g.

$Rev ed.$

or

$rev ed.$

The documentation explains the use of $ and how to output literal text.

And you can control if that text is output at all by placing in in a conditional group. For example to output it only if the edition field has content.

If you need more followup please take this off forum and contact tech support directly.

Jon
Sonny Software

Adrian Petre
Posts: 14
Joined: Wed Aug 17, 2016 4:15 am

Re: The Bookends Guide to the SBL format

Post by Adrian Petre » Sun Sep 15, 2019 8:29 am

Thank you. I will contact the support team.

Keep up the great job!

Post Reply